Vaisala PTB210 SERIES Manuál s instrukcemi stáhnout pdf (Strana 63)

However, the signals of precipitation detection are directly processed by the SPS

where the remaining data is retrieved by the master PC for further processing.

The power supply is also splited which is represented by the red line.

6.2 Mounting

Figure 6.2: Weather Station Mast

There is a need to have an experimantal setup wich is equivalent to the information

ﬂow in the container before ﬁnally installing all components. Therefore a wiring

panel was developed which contains all interfaces and plug connections from the

sensor to the logger. A setup according to this plan was done to simulate the op-

erating mode in the BGC-FTIR-Container as well as to verify a proper signal ﬂow.

For a detailed wiring plan please see [16].

After a proper test run, the instrumentation of the weather station has to be

mounted. For this purpose a mast was installed on top of the container to pro-

vide a basis for mounting as shown in Fig. 6.2. Further componets like power

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 136 137

Žádné komentáře

Vaisala PTB210 SERIES Manuál s instrukcemi Strana 63