Vaisala PTB330TS Uživatelská příručka stáhnout pdf (Strana 44)

User's Guide ______________________________________________________________________

42 ___________________________________________________________________M210983EN-A

Do not push the connector with conducting material, for example

with a metallic screwdriver.

0811-094

Figure 18 Changing the MI70 Battery Pack

5. Position the battery pack in inside the case, replace the back plate,

and tighten the screw.

6. Charge the battery pack before use. Refer to section Charging on

page 29.

Changing the HMP155 Probe Filter

New filters for the HMP155 probe can be ordered from Vaisala; see

Options and Accessories on page 85. Change the filter as follows:

1. Remove the filter from the probe by turning it counter-clockwise.

When pulling out the filter, be sure not to damage the sensor. Refer

to Figure 19 on page 43.

2. After removing the filter, check the O-ring and replace it if

necessary.

3. Install a new filter on the probe.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 88 89

Žádné komentáře

Vaisala PTB330TS Uživatelská příručka Strana 44