Vaisala BAROCAP PTB330 Uživatelská příručka Strana 58

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 144
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 57
USER'S GUIDE____________________________________________________________________
56 __________________________________________________________________ M210855EN-D
Measuring Settings
See the calculation formulas for pressure values in Appendix A,
Calculation Formulas, on page 133. To change the measuring settings:
1. Open the MAIN MENU
by pressing any of the arrow buttons.
2. Select Measuring and press the right arrow button.
3. Select Measuring settings. Press the right arrow button.
4. Select an option with up/down arrow buttons. Press the SET
button.
5. First press the left/right arrow buttons to move from a digit to
another. Then press the up/down arrow buttons to enter desired
numeric value for the digit. Repeat the procedure until all the
desired digits are set. Press the OK button.
6. Press EXIT to return to the basic display.
Diagnostic Settings
Use the display/keypad or the serial line commands PSTAB
on page 82, and DPMAX on page 78 to set the diagnostic settings:
1. Press any of the arrow buttons to open the MAIN
MENU.
2. Select System and press the right arrow button to confirm your
selection.
3. Select Diagnostics and press the right arrow button to confirm
your selection.
4. Select Diagnostic Settings.
5. Use the up/down arrow buttons to select Stability. Press SET
to input the value. Use the left/right arrow buttons to move
between the value and the unit. Set the value and the unit using
the up/down arrow buttons. Press OK to confirm your choice.
6. Proceed as instructed in point 5 to set Max. diff.
7. Press SET to confirm your selection.
8. Press EXIT to return to the basic display.
Use the display/keypad to check the stability of the pressure
measurement. If concurrent pressure measurements differ less than the
set value, the display outputs a small "OK" text.
Zobrazit stránku 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 143 144

Komentáře k této Příručce

Žádné komentáře