Vaisala PTU300 Uživatelská příručka stáhnout pdf (Strana 94)

User's Guide _______________________________________________________________________

92 ___________________________________________________________________ M210796EN-G

0810-070

Figure 57 Opening a Serial Connection

4. Click the Open button to open the connection window and start

using the serial line.

If PuTTY is unable to open the serial port you selected, it will show

you an error message instead. If this happens, restart PuTTY and

check the settings.

Opening a Telnet Session (LAN/WLAN)

NOTE

The instructions below assume that the LAN/WLAN interface on the

transmitter is correctly configured and the network connection is already

done.

1. Power up the instrument and start the PuTTY application. If your

transmitter acquires a network address using DHCP, wait for a

minute for this to complete, then verify the address from the

transmitter.

2. In the Session window, select the Telnet connection type.

3. Enter the IP address of your transmitter in the Host Name (or IP

address) field. Use the default Telnet port 23.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 216 217

Žádné komentáře

Vaisala PTU300 Uživatelská příručka Strana 94