Vaisala BAROCAP PTB330 Uživatelská příručka stáhnout pdf (Strana 78)

User's Guide ______________________________________________________________________

76 __________________________________________________________________ M210855EN-C

General Settings

Changing Quantities and Units

To change quantities and units use serial commands or the optional

display/keypad. See Table 1 on page 18 for available quantities.

MPCP1/

MPCP2/

MPCP3

Performs a multipoint correction for the

barometer module/module.

CTEXT Shows or sets the calibration info text.

NOTE

The calibration and adjustment commands are available in adjustment

mode only. Press the adjustment button before inputting these

commands.

Setting and testing the analog outputs

AMODE Displays the analog output mode (if an

AOUT-1 module/s is/are connected).

ASEL Sets the analog output quantity and

scaling (low/high).

ACAL Adjusts the analog output.

AERR Sets the analog output error value.

ATEST Sets the analog output test value

Setting and testing the relays

RSEL Sets the relay scaling (if a RELAY-1

module/s is/are connected).

RTEST Sets a test value for a relay output.

NOTE

Only the quantities selected when ordering the device can be selected

as a display output quantity.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 137 138

Žádné komentáře

Vaisala BAROCAP PTB330 Uživatelská příručka Strana 78