Vaisala HUMICAP HMT330 SERIES Uživatelská příručka stáhnout pdf (Strana 83)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 83

Telnet Settings

When a telnet connection is established via the LAN or WLAN interface,

the session has the same communication mode, run interval, poll address

and echo settings as the serial port (user port) session would have.

These settings can be changed using the display/keypad, using the serial

line (user port or service port), or on-the-fly during the telnet session.

The display menu path to the telnet settings is:

Main menu ► Interfaces ► Network Interface ► Telnet settings.

The commands for changing the settings are SMODE, INTV, ADDR,

and ECHO.

Web Configuration for LAN and WLAN

The LAN and WLAN interfaces both have a web configuration page that

is accessible using a browser. If you have not disabled the page from the

network settings, you can access it with a web browser at the IP address

of the interface.

When accessing the web configuration page, you must first log in.

Username: user

Password: vaisala

The web configuration page provides similar network configuration

options as the serial line and the display/keypad. It also has additional

options for advanced users. For example, there are more options for

securing the wireless network.

If these additional options are used, they will appear as custom

configurations when viewed from the serial line or the display/keypad.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 177 178

Žádné komentáře

Vaisala HUMICAP HMT330 SERIES Uživatelská příručka Strana 83