Vaisala HUMICAP HMT330 SERIES Uživatelská příručka stáhnout pdf (Strana 92)

User's Guide ______________________________________________________________________

92 __________________________________________________________________ M210566EN-H

g/kg Tw= 15.7 'C ppm= 12084 pw= 12.10 hPa pws= 30.11 hPa

h= 43.5 kJ/kg

For more information on chemical purge, see section Chemical Purge

(Optional) on page 124.

Where the state of the probe is indicated by the following letters and values:

... xxx =

ormal operation where h xxx= Probe heat power

X ... xxx = Sensor heating where xxx = Sensor temperature (ºC)

H ... xxx = Chemical purge where xxx = Sensor temperature (ºC)

S ... xxx = Sensor cooling

after purge

where xxx = Sensor temperature (ºC)

General Settings

Changing Quantities and Units

To change quantities and units use serial commands or the optional

display/keypad. See Table 3 on page 19 for available quantities and

Table 4 on page 19 for optional quantities.

NOTE

Only the quantities selected when ordering the device can be selected as

a display output quantity.

Using Display/Keypad

Use display/keypad to select the display output quantities.

1. Press any of the arrow buttons to open the MAIN MENU.

2. Press the ► arrow button to select Display.

3. Press ► arrow button to select Quantities.

4. Select the quantity by using the ▲▼ arrow buttons. Confirm the

selection by pressing SELECT. You can select 1 ... 3 display

quantities at a time.

5. Press EXIT to return to the basic display.

To select display units:

1. Press any of the arrow buttons to open the MAIN MENU.

2. Press the ► arrow button to select Display.

3. Use the ▲▼arrow buttons to select Units. Confirm the selection

by pressing the right-hand arrow button.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 177 178

Žádné komentáře

Vaisala HUMICAP HMT330 SERIES Uživatelská příručka Strana 92